Version:
- The electric drive can be used to run the screw forward to the point where torque is applied. The screw is then tightened manually to the set torque. Setting and operation directly at the torque wrench.
- Quick reporting of the torque via ONE-KEY™ for generation of reports.
- LCD display with strong colours and quick response times. Feedback on status and display of relevant information.
- Warning signals can be optionally set as tactile (vibration), visual (LEDs and display) and acoustic or combinations of these. The early warning point can be entered individually.
- Up to 28,000 measured values can be saved on the torque wrench.
- With calibration reminders. After a certain number of duty cycles and elapsed time.
Units of measure: Nm, ft·lbs, in·lbs, kg·cm.
Standard:
Tested to DIN EN ISO 6789.
Accuracy:
Clockwise +/- 2%, anticlockwise +/- 3%.
Supplied with:
Supplied with 12 V / 2.0 Ah Red Li-ion battery, C12C charger and sturdy plastic case.
Note:
See No. 073814ff and No. 073840 for suitable batteries and chargers. Recalibration is performed by the manufacturer.
Technical Data
| suitable battery - supplier / battery type / voltage | Milwaukee type B 12 V |
| Direction of tightening | For right and left-hand tightening |
| Torque measuring accuracy | ±2 %; ±3 % |
| App link | OneKey |
| Test certificate | Manufacturer’s test certificate |
| Calibration | Price on request |
| Overall length L | 597 mm |
| Torque range | 16.9 Nm - 203.4 Nm |
| Torque range | 12.5 lbfft - 150 lbfft |
| Torque range | 150 lbfin - 1,800 lbfin |
| Resolution | 0.1 Nm |
| Weight | 2,600 g |
| Square drive | 1/2 inch |
| Display | digital |
| Release signalling | acoustic; haptisk; haptisk |
| Trigger principle | Vibration motor |
| Power supply | Rechargeable battery-powered |
| Number of rechargeable batteries contained | 1 |
| Type of rechargeable battery | Lithium-ion |
| Battery capacity | 2 Ah |
| Nominal voltage | 12 V |
| Motor design | Fuel™ |
| No load speed | 0 rpm - 100 rpm |
| Measurement technology | electronic |
| Data can be recorded | no |
| Setting the trigger value | digital, adjustable |
| Feedback | acoustic signal; udløsning; visning |
| Reversible reading | Nm; lbfin; lbfft; kgf-cm |
| Measurement process | Torque |
| Adjustable trigger value | adjustable |
| Standard | DIN EN ISO 6789 |
| Type of product | Torque Wrench |
