KUKKO

Vam 2 chấu KUKKO -465010

Galvanised, with reversible pulling hooks, usable as internal and external puller. With end retainer

Vam 2 chấu KUKKO - 465030

With reversible pulling hook, adjustable clamping width, can be used as inside and outside puller,exchangeable pulling hooks (465035) for each necessary clamping depth

Vam 2 chấu KUKKO - 465060

With reversible pulling hooks, adjustable reach, for use as either outside or inside puller,pulling hooks parallel in every position, heavy-duty model, high power, easy-to-handle design. Arms with quick adjustment,knurled hand wheel for quick release and movement of the pulling hooks.

Vam 2 chấu KUKKO -465080

With reversible pulling hooks, adjustable reach, for use as either outside or inside puller,pulling hooks parallel in every position, heavy-duty model, high power, easy-to-handle design.

Vam 2 chấu KUKKO -465110

For use in confined spaces the pulling hooks have a particularly space-saving form; for releasing flush-fitting parts such as axle bearings, ball bearing rings, pinions, etc

Vam 2 chấu KUKKO -# 465130

With pointed claw legs for tight spaces when pulling pinions, bearings, and similar parts; by means of the scissors-like hook guide the claw feet are pressed firmly against the part being pulled during the pulling operation

Vam 2 chấu, 3 chấu KUKKO - 465150

Self-centring,for small electric motors, battery terminals, small ball bearings, etc.; these handy, space-saving models with slim hooks are particularly suitable for automotive electrical equipment, electrical workshops, compressed air maintenance and similar uses.

Vam 2 chấu, 3 chấu KUKKO - 465155

Self-centring, for small electric motors, battery terminals, small ball bearings, etc.; these handy, space-saving models with slim hooks(only 2 mm thick) are particularly suitable for very cramped spaces

Vam 3 chấu KUKKO - 465170

the threaded bush is turned by the wrench, causing the pulling hooks to open and close evenly, setting is centric.

466660 Screw extractor KUKKO for broken-off screws; of high-quality chrome-vanadium steel, good grip thanks to fine spiral

466670 Screw extractor set KUKKO with 6 screw extractors 466660

466676 Screw extractor set KUKKO. 5-piece setin plastic box, for removing broken screws. Newly developed model with optimised engagement geometry. Combines the advantages of the finally-grooved German design with those of screwing extractors having a sharp edged attack.

for dismantling ball bearings, gears, etc., where there is no space for hooks. Pulling unit see 465410.

465580 Installation tool set KUKKO
for quick and reliable installation of roller bearings with bore diameters up to 50 mm and trouble-free installation of bushes, sealing rings, pulleys and similar parts. 

for ball bearings which sit on the shaft in a housing, access is in the bearing rings, which means that the ball cage has to be destroyed. After that the ball segments are introduced into the pull tabs between the inner and outer ring of the bearing corresponding to the balls of the bearing and set by turning 90°

especially for ball bearings which sit on the shaft in a housing, in metal box, containing:1 puller Type 70-1, 3 sets hooks and support rings, Type 711-713, 1 puller Type 70-2, 2 sets hooks and support rings, Type 721+722, 1 puller Type 70-3, 2 sets hooks and support rings, Type 731+732

Set inL-BOXX, for detaching ball joints, gear wheels etc., where there is no space for a hook. Contents: 1 Separator 465390, 1 Puller 465410, 1 pair extensions 465420

2- and 3-arm universal puller set in L-BOXX, with narrow puller legs for very narrow clearance. Contents:1 2-arm puller 20-10-SP, clamping width 120 mm, clamping depth 100 - 350 mm, 1 3-arm puller 30-10-SP, clamping width 130 mm, clamping depth 100 - 350mm , 1 mechanical pressure spindle 614250l length 250 mm, thread M 14 x 1.5 mm